Roll Feed Unit Error; No Roll Unit; Manual Printing Is Selected; Manual Printing Is Selected, But A Roll Is Loaded - Canon iPF6400S Basic Manual

iPF6400S Basic Guide

Roll feed unit error.

Cause
The Roll Feed Unit is not
working.

No Roll Unit.

The printer has received a print job, but the Roll Feed Unit
is not installed.

Manual printing is selected.

Cause
You have attempted to print on a sheet, but no
sheet is loaded.

Manual printing is selected, but a roll is loaded.

Cause
A print job for printing on sheets
was sent when a roll is loaded.

Wrong paper feed slot for manual paper.

Cause
Data for Media Type that should
be loaded in Front Paper Feed
Slot was sent while paper was
loaded in Top Paper Feed Slot.
Alternately, data for Media Type
that should be loaded in Top
Paper Feed Slot was sent while
paper was loaded in Front Paper
Feed Slot.
140
Turn off the printer, remove the Roll Feed Unit momentarily, and then reinstall it.
(See "Removing the Roll Feed Unit.")➔User's Guide
(See "Installing the Roll Feed Unit.")➔User's Guide
If the message is displayed again despite these measures, contact your Canon dealer for
assistance.
Cause
Press ▲ or ▼ to select Load Paper, and then press the OK button.
Load a sheet, and then print.
(See "Loading and Printing on Sheets.")➔User's Guide
Press ▲ or ▼ and select Stop Printing or press the Stop button to
stop printing.
1. Press ▲ or ▼ to select Remove Roll Paper, and then press the OK button to
stop printing.
2. After removing the roll, load and print on a sheet of the type and size of paper you
have specified in the printer driver.
(See "Removing the Roll from the Printer.")➔P.17
(See "Loading and Printing on Sheets.")➔User's Guide
Press ▲ or ▼ to select Stop Printing, and then press the OK button to stop
printing.
Press the ▲ or ▼ to select Eject Paper, and then remove the paper.
Next, reload the paper using the procedure Display Screen in Control Panel.
(See "Loading Sheets in the Feed Slot.")➔P.21
Press ▲ or ▼ to select Stop Printing and cancel printing.
Corrective Action
Corrective Action
Press the Stop button and stop printing.
1. Turn the printer off and install the Roll Feed Unit.
2. Turn the printer on and resend the print job.
Corrective Action
Corrective Action
Corrective Action