External Audio Sources; Switching The Aux Input On/Off; Technical Data - Blaupunkt San Francisco CD70 Operating Instructions Manual

EXTERNAL AUDIO SOURCES

External audio sources
Instead of the CD changer, you can also con-
nect up a different external audio source with
a line output. Such sources can be, for exam-
ple, portable CD players, MiniDisc players or
MP3 players.
The AUX output has to be switched on in the
install menu.
To connect up an external audio source, you
will need an adapter cable, obtainable from
any Blaupunkt dealer.

Switching the AUX input on/off

Hold down the MENU button 8 until
the install menu appears on the display.
Press the soft key 4 with the display
allocation "AUX".
When "AUX" appears on the display, the in-
put is already activated.
Press the or
AUX on or off.
Press the OK button 5 to return to the
previous menu level or the MENU but-
ton 8 to leave the menu altogether.
The settings are now stored.
Note:
When the AUX input is switched on, it can be
selected using the CDC button =.
72
button 7 to switch

TECHNICAL DATA

Technical data
Amplifier
Output power:
Tuner
Frequency ranges:
FM :
MW :
LW :
FM transmission range:
CD
Transmission range:
Pre-amp output
4 channels:
AUX input
Input sensitivity:
Subject to changes!
4 x 25 watts sine in
accordance with
DIN 45 324 at 14.4V,
4 x 45 watts max.
power
87,5 – 108 MHz
531 – 1 602 kHz
153 – 279 kHz
30 - 15 000 Hz
20 - 20 000 Hz
5 V / 10 kΩ
1,2 V / 10 kΩ