Selecting An Equaliser; Select Sound Preset; Setting The Equalisers Manually - Blaupunkt San Francisco CD70 Operating Instructions Manual

Selecting an equaliser

After automatic or manual line-up,
press the DSA button 6;
select one of the equalisers EQ1, EQ2
or EQ3 using the
press the OK button 5.

Select sound preset

You can preselect sound settings for the fol-
lowing musical styles:
ROCK
POP
JAZZ
CLASSIC
VOCAL
The settings for these musical styles are pre-
programmed.
Press the DSA button 6.
Select the desired sound preset using
button 7.
the or
Press the OK button 5.
DSA - DIGITAL SOUND ADJUSTMENT
button 7;
/

Setting the equalisers manually

We recommend you use a CD you are famil-
iar with when adjusting the equaliser.
Before adjusting the equaliser, set the tone
and volume balance to zero and deactivate
the loudness function. To do this, please see
the chapter "Audio settings".
Listen to a CD.
Evaluate the tone impression according
to your taste.
Now consult the chart "An aid to adjust-
ing the equaliser" under "Sound impres-
sion".
Set the equaliser values as described
under "What to do".
Programming the settings
Press the DSA button 6.
Select one of the equalisers EQ1, EQ2
or EQ3 using the
Select the left or right channel by press-
ing the "LEFT" or "RGHT" soft key.
To select the frequency,
press the or
set the frequency level using the
button 7;
select the settings for both channels as
described above;
press the OK button 5.
button 7.
or
button 7;
or
67