Selecting The Frequency Range/Memory; Tuning Into A Station - Blaupunkt San Francisco CD70 Operating Instructions Manual

RADIO MODE
Switching the RDS function on/off
To use the RDS functions AF and REG,
press the TUNE button > when in radio
mode.
The radio function menu appears on the dis-
play.
Press the soft key 4 with the display
allocation "RDS".
The RDS functions are active when "RDS"
lights up on the display.
To return to the basic radio menu,
press the TUNE button > or wait 8 sec-
onds. The settings are now stored.
Switching REG on/off
To use the RDS function REG,
press the TUNE button > when in radio
mode.
The radio function menu appears on the dis-
play.
Press the soft key 4 with the display
allocation "NEXT".
The "second page" of the radio function menu
appears on the display.
Press the soft key 4 with the display
allocation "REG".
When the REG function is switched on or off,
"REG ON" or "REG OFF" appears on the dis-
play. When the REG function is activated, an
arrow symbol lights up alongside "REG".
Press the TUNE button > or wait
8 seconds. The settings are now stored.
Selecting the frequency range/
memory
This unit can receive programmes broadcast
over the FM as well as MW and LW (AM) fre-
quency ranges. There are four preset memo-
ry levels for the FM range and one each for
the MW and LW ranges.
Six stations can be stored on each memory
level.
50
Selecting the wavelength
To select the wavelength, FM, MW or LW,
press the TUNE button > when in radio
mode.
The radio function menu appears on the dis-
play.
Press the soft key 4 with the display
allocation "FM" for the FM wavelength.
Press the soft key 4 with the display
allocation "AM" for the MW and LW
wavelengths.
To return to the basic radio menu,
press the TUNE button > or wait 8 sec-
onds. The settings are now stored.
Selecting the FM memory
To switch between the FM memory levels,
FM1, FM2, FM3 or FMT,
press the soft key 4 with the display
allocation "NEXT" repeatedly when in
FM radio mode until the desired memo-
ry level appears on the display.
The memory levels are called up in the fol-
lowing order: FM1, FM2, FM3, FMT.
Selecting MW or LW
To select an AM wavelength, MW or LW,
first of all select the AM wavelength;
press the soft key 4 with the display
allocation "NEXT" repeatedly until the
desired wavelength, MW or LW, ap-
pears on the display.

Tuning into a station

There are various methods available for tun-
ing into a station.
Automatic station search mode
Press the or
The unit tunes into the next receivable sta-
tion.
button 7.