Storing Stations; Storing Stations Automatically (Travelstore); Listening To Preset Stations; Scanning Stations - Blaupunkt San Francisco CD70 Operating Instructions Manual

RADIO MODE
The display shows the currently set value for
sensitivity. "DX 3" denotes maximum sensi-
tivity for long-range reception. "DX 1" is the
minimum.
Press the MENU button 8 once or OK
5 repeatedly until the desired menu
appears on the display. The settings are
now stored.

Storing stations

Storing stations manually
Select the required FM memory level,
FM1, FM2, FM3, FMT or either wave-
length MW or LW.
Tune into the desired station as de-
scribed under "Tuning into a station".
Hold down one of the six soft keys 4
on which you wish to store the station
for more than two seconds.
Storing stations automatically
(Travelstore)
You can automatically store the six stations
with the strongest reception in the region (only
FM). The stations are stored in the FMT mem-
ory.
Note:
Stations that were previously stored in this
memory are deleted in the process.
To use the Travelstore function,
press the TUNE button > when in radio
mode.
The radio function menu appears on the dis-
play.
Press the soft key 4 with the display
allocation "TS".
The automatic station storing procedure be-
gins. "T-STORE" appears on the display. Af-
ter the process is completed, the station
stored in FMT memory location 1 is played.
52

Listening to preset stations

Select the memory or frequency range
in which the station was stored.
Press the soft key 4 with the display
allocation of the name of the desired
station.

Scanning stations

Scanning receivable stations (Radio-
SCAN)
You can briefly listen in to all receivable sta-
tions. The scanning time can be set in the
menu at between 5 and 30 seconds.
Starting Radio-SCAN
To start the Radio-SCAN function,
press the TUNE button > when in radio
mode.
The radio menu function appears on the dis-
play.
Press the soft key 4 with the display
allocation "SCAN".
The scanning process begins. The next re-
ceivable station is briefly played. The stations
are scanned in ascending order.
Scanning stored stations (Preset Scan)
You can listen in to all currently receivable
stations on all memory levels. The scanning
time can be set in the menu at between 5
and 30 seconds.
Starting preset scan
To start preset scan,
press the TUNE button > when in radio
mode.
The radio function menu appears on the dis-
play.
Press the soft key 4 with the display
allocation "PS".
The scanning process begins. The memory
levels are scanned consecutively beginning
with memory level FM1. An arrow symbol