Resetting The Filter Counter - Panasonic PT-CW230EA Operating Instructions Manual

4 ) Close the lamp cover.
Close the lamp cover and secure the screw.

Resetting the Filter Counter

Be sure to reset the Filter counter after replacing the air filter unit. ( page 59" Filter counter reset")
Attention
Turn off the power before you replace the air filter unit.
When attaching the air filter unit, make sure that the projector is stable, and work in an environment that is
safe, even in the event of the air filter unit dropping.
Do not operate the projector with the filter removed. Dust may accumulate on the optical elements degrading
picture quality.
Do not put anything into the air ports. Doing so may result in malfunction of the projector.
The air filter unit to be replaced should be an unused product.
Replacement
ENGLISH -
63