Resetting The Filter Counter; Attaching The Filter Cover To The Projector - Panasonic PT-VX400NTU Operating Instructions Manual

2 ) Replace the air filter units.
Put new filters back into the position. Make sure that the filters are fully inserted to the projector.
z

Resetting the Filter Counter

J
Be sure to reset the Filter counter after replacing the filter. (
Attention
Turn off the power before you replace the air filter unit.
z
When attaching the air filter unit, make sure that the projector is stable, and work in an environment that is
z
safe, even in the event of the air filter unit dropping.
Do not operate the projector with the filters removed. Dust may accumulate on the optical elements
z
degrading picture quality.
Do not put anything into the air vents. Doing so may result in malfunction of the projector.
z
Do not wash the filters with water or any other liquid matter. Otherwise the filters may be damaged.
z

Attaching the Filter Cover to the Projector

J
The supplied filter cover is designed for preventing dust accumulation on the filter when mounting the projector on
the ceiling.
1 ) Turn over the projector.
2 ) Remove the filter cover (bottom).
3 ) Attaching the filter cover to the projector.
Push the cover as the picture shown.
z
4 ) Attach the projector to the ceiling mount
in accordance with the instruction
manuals which come with the ceiling
mount.
Attention
Please keep the filter cover (bottom) for later use.
z
If the Projector Mount Base ET-PKV100B is applied, the supplied filter cover is unnecessary.
z
page 63" Filter counter reset")
Æ
To Ceiling Mount
( page 66)
Æ
Replacement
Filter Cover
(supplied)
Projector
ENGLISH -
67