Install The Log Assembly - Quadra-Fire QFI30FB Owner's Manual

H. Install the Log Assembly
Log Set Assembly: LOGS-QFI30FB
Models: QFI30FB
5 5
SRV2221-704 SRV2221-704
2 2
SRV2221-701 SRV2221-701
1 1
SRV2221-703 SRV2221-703
PILOT BRACKET PILOT BRACKET
GRATE BAR GRATE BAR
GRATE TINES GRATE TINES
Figure 2. Reference Points for Log Placement
CAUTION: Logs are fragile, handle with care. Glass Rock (2201-853):Fill each light hole evenly with the glass rock.
Use all of the glass rock provided.
LOG RESTS LOG RESTS
AGAINST BACK AGAINST BACK
OF FIREBOX OF FIREBOX
CENTER LOG CENTER LOG
OVER PILOT OVER PILOT
BRACKET BRACKET
Figure 4. Place Log #1
Log #1 (SRV2221-703): Position Log #1 as shown in Figure 4. See Figure 2 for additional points of reference. Center the
log over the pilot bracket. Pull the log forward until contact is made with burner.
Log #2 (SRV2221-701): Position Log #2 as shown in Figure 5. See Figure 2 and Figure 6 for additional points of reference.
The recessed area on the bottom of the log and the back right corner of the burner top mate.
7 7
SRV2221-707 SRV2221-707
6 6
SRV2221-705 SRV2221-705
4 4
SRV2221-706 SRV2221-706
3 3
SRV2221-702 SRV2221-702
LIGHT LIGHT
HOLES HOLES
LOG PINS LOG PINS
1 1
Quadra-Fire • QFI30FB, QFI35FB • 2221-900 Rev. K • 3/11
Figure 1. Logs Installed
GLASS ROCK GLASS ROCK
Figure 3. Install Glass Rock
FLAT SPOT FLAT SPOT
FOR LOG #6 FOR LOG #6
Figure 5. Place Log #2
RECESSED RECESSED
AREA OF LOG AREA OF LOG
MATES WITH MATES WITH
BURNER TOP BURNER TOP
2 2
31