Install The Log Assembly - Quadra-Fire QFI30-C Owner's Manual

G. Install the Log Assembly
Log Set Assembly: LOGS-QFI30
Models: QFI30, QFI30-C
SRV2227-702 SRV2227-702
SRV2227-705 SRV2227-705
SRV2227-706 SRV2227-706
Figure 2. Refractory and Logs Installed
CAUTION: Logs are fragile, handle with care. Install back refractory by placing it against the back of the fi rebox. See Figure
3. The back refractory must be held in the upright position until the side refractory is installed. Install the left side refractory
as shown in Figure 4. Bend the refractory tab down as shown in Figure 5. Repeat this step for the right refractory panel.
Figure 4. Install Side Refractory
32
SRV2227-703 SRV2227-703
SRV2227-704 SRV2227-704
SRV2227-701 SRV2227-701
Quadra-Fire • QFI30-C, QFI35-C • 2227-901 Rev. H • 7/12
LOG SUPPORT LOG SUPPORT
PILOT PILOT
ASSEMBLY ASSEMBLY
LOG PIN LOG PIN
LEFT GRATE LEFT GRATE
TINE TINE
Figure 1. Reference Points for Log Placement
Figure 3. Install Back Refractory
Figure 5. Bend Refractory Tab
RIGHT GRATE TINE RIGHT GRATE TINE