Quadra-Fire QFI30FB Owner's Manual page 32

2 2
Figure 6. Log #2
Log #3 (SRV2221-702): Position Log #3 as shown in Figure 7. See Figure 2 and Figure 8 for additional reference points.
Mate the base of the left grate tine with the groove located on the bottom of the log. Pull the log forward until it stops against
the vertical portion of the grate tine. Swing the rear of the log counterclockwise until it touches the fi rebox.
BASE OF GRATE TINE FITS IN GROOVE BASE OF GRATE TINE FITS IN GROOVE
BACK BACK
Figure 8. Log #3 - Bottom View
Log #4 (SRV2221-706): Position Log #4 as shown in Figure 9. See Figure 2 and Figure 10 for additional references. Mate
the grate tine slot with the base of the right grate tine. The grate tine slot is located on the bottom right end of Log #4. See
Figure 10. Slide the right end of the log forward until the tine fully engages the slot. Mate the log pin slot with the right log pin.
GRATE TINE SLOT GRATE TINE SLOT
4 4
RIGHT RIGHT
Figure 10. Log #4 - Bottom View
Log #5 (SRV2221-704): Position Log #5 as shown in Figure 11. See Figure 2 and Figure 12 for additional references. Rest
the left end of Log #5 on the fl at spot indicated in Figure 7. Mate the slot, located on the bottom of the log, with the left log pin.
Ensure the nose of the log does not cover any burner ports.
32
FRONT FRONT
RECESSED AREA RECESSED AREA
BACK BACK
3 3
FRONT FRONT
LOG PIN SLOT LOG PIN SLOT
LEFT LEFT
Quadra-Fire • QFI30FB, QFI35FB • 2221-900 Rev. K • 3/11
FLAT SPOT FLAT SPOT
FOR LOG #5 FOR LOG #5
3 3
Figure 7. Place Log #3
MATE LOG PIN MATE LOG PIN
WITH LOG SLOT WITH LOG SLOT
Figure 9. Place Log #4
LOG LOG
GROOVE GROOVE
FOR LOG #7 FOR LOG #7
Figure 11. Place Log #5
LOG TOUCHES LOG TOUCHES
FIREBOX FIREBOX
MATE GRATE TINE MATE GRATE TINE
WITH LOG SLOT WITH LOG SLOT
4 4
FLAT SPOT FLAT SPOT
FOR LOG #6 FOR LOG #6
5 5