Quadra-Fire QFI30FB Owner's Manual page 35

GRATE TINE GROOVE GRATE TINE GROOVE
FRONT FRONT
Figure 6. Log #3 - Bottom View
Log #3 (SRV2223-702): Position Log #3 as shown in Figure 7. See Figure 2 and Figure 6 for additional references. Mate
the grate tine groove with the base of the left grate tine. Slide the log forward until it stops against the vertical portion of the
left grate tine. Mate the burner top groove with the left edge of the burner top as shown in Figure 7.
LOG PIN SLOT LOG PIN SLOT
LEFT LEFT
Figure 8. Log #4 - Bottom View
Log #4 (SRV2223-706): Position Log #4 as shown in Figure 9. See Figure 2 and Figure 8 for additional references. Mate
the slot located at the left end of log #4, shown in Figure 8, with the right log pin. Rotate the right end of the log clockwise,
until the log contacts the grate bar.
FLAT SPOT FLAT SPOT
FOR LOG #7 FOR LOG #7
REST LOG ON REST LOG ON
FLAT SPOT FLAT SPOT
5 5
3 3
LINE SHOWS BACK LINE SHOWS BACK
EDGE OF GRATE BAR EDGE OF GRATE BAR
Figure 10. Place Log #5
Log #5 (SRV2223-704): Position Log #5 as shown in Figure 10. See Figure 2 and Figure 7 for additional references. Rest
the left end of the log on the fl at spot of log #3. Locate the groove located on the right end of the log. Mate the groove with
the grate bar. Use the left log pin to positively locate the right end of the log.
Log #6 (SRV2223-705): Position Log #6 as shown in Figure 11. See Figures 2, 5 and 10 for additional reference points.
Place the front and back ends of the log on the fl at spots as shown in Figure 11.
BURNER TOP GROOVE BURNER TOP GROOVE
3 3
BACK BACK
4 4
RIGHT RIGHT
1 1
2 2
FLAT SPOT FLAT SPOT
FOR LOG #6 FOR LOG #6
USE LOG PIN TO USE LOG PIN TO
LOCATE LOG LOCATE LOG
Quadra-Fire • QFI30FB, QFI35FB • 2221-900 Rev. K • 3/11
LOG #3 TOUCHES LOG #3 TOUCHES
GRATE TINE GRATE TINE
3 3
Figure 7. Place Log #3
MATE LOG PIN MATE LOG PIN
WITH LOG SLOT WITH LOG SLOT
LOG CONTACTS LOG CONTACTS
Figure 9. Place Log #4
REST ENDS OF LOGS REST ENDS OF LOGS
ON THE FLAT SPOTS ON THE FLAT SPOTS
Figure 11. Place Log #6
FLAT SPOT FLAT SPOT
FOR LOG #5 FOR LOG #5
MATE GROOVE WITH MATE GROOVE WITH
CORNER OF BURNER TOP CORNER OF BURNER TOP
4 4
GRATE BAR GRATE BAR
6 6
35