Intercom - AT&T E5902B User Manual

TONE
MUTE REDIAL
DELETE PAUSE
INTERCOM TO:

INTERCOM

Telephone operation
Intercom
Use the intercom feature for conversations
between handsets.
1. Press INT. The screen of the originating
handset will show INTERCOM TO.
TONE
MUTE REDIAL
DELETE PAUSE
2. Enter the handset number of the des-
tination handset. The display will show
CALLING HANDSET X. The destination
handset will ring, and its screen will
show HANDSET X IS CALLING.
NOTES:
• Before the intercom call is answered, you can
cancel the intercom call by pressing OFF�CLEAR
or INT.
• If the destination handset is not answered within
100 seconds or if it is in the directory or call log
mode, or out of range, the originating handset
will show the message UNABLE TO CALL TRY
AGAIN.
3. On the ringing destination handset,
press
(0-9, * or #) to answer the inter-
com call.
NOTE
temporarily silence the intercom ringer.
To end the intercom call:
• Press
handset.
-OR-
• Place either handset in the telephone
base or charger.
PHONE
SPEAKER, or any dial pad key
:
Pressing
OFF
�CLEAR
14
, INT,
�FLASH
OFF� or MUTE will
CLEAR
or INT on either