How To Operate; Install Turbo Tool; Secure Back Hose; Cord Release - Dirt Devil M088300 Vision Turbo Owner's Manual

Table of Contents

Advertisement

J
Clip turbo tool onto the
front of the turbo tool
caddy.
TOOL STORAGE
Attach tools: (a) Slide the
dust brush onto post on the
upper tool caddy with bris-
tles facing out. (b) Slide the
extension wandlcrevice tool
into round slot on the front
right side of tool caddy.
CORD RELEASE
Wrap hose around back of
hose caddy (Diagram 1).
Push hose wand down into
the right side of cleaner
(Diagram la).
INSTALL DlRT CUP LID
Align slots on lid with tabs on cup
(Diagram 4). Push the lid down and
twist clockwise. NOTE: There is a
guide arrow on back of lid. Align
arrow with right edge of dirt cup
handle and turn clockwise until
secure (Diagram 4a).
Align tabs on clear dirt passage
window with the slots on the
lower hose cuff. Push and turn
hose clockwise until secure.
INSTALL DlRT CUP
Set aligning tab on bottom of
dirt cup into rectangular slot
on cleaner (Diagram 5), and
push to snap into place
(Diagram 5a).
Turn Quick Cord
Release for easy
cord removal. Store
cord in cord guide
(see Features
-
pg.
5) to keep out of the
way while vacuum-
ing.
adjust
lever
to
match the surface
being
cleaned.
IMPORTANT: FOR
EASIEST ADJUST-
MENT,
PLACE
CLEANER IN FULL
U P R I G H T
POSITION.

Advertisement

Table of Contents
loading

Table of Contents