To Change Or Dial Entries - AT&T E5811 User Manual

1.
DIR
2.
DIR
3.
MENU/
SELECT
DIR
DIR
Press /SELECT to
MENU
choose blinking option

To change or dial entries

When any entry is displayed, press MENU/
to see options. Press
/SELECT again to select it.
MENU
To edit an entry
When EDIT is blinking, press
can change the name and number (or distinctive
ring setting on the cordless handset) by following
the steps described on pages 19-20.
To delete an entry
Press or
CID
then press
MENU
tion screen of ERASE NO YES.
You can press
NO or YES to determine:
YES blinking, press
delete the entry.
NO blinking, press
cancel the procedure.
To make an entry into a speed dial entry
Press or
CID
/SELECT, then dial a memory location (1-9) to
MENU
transfer this entry to your speed dial directory.
NOTE: If you use a memory location that is already assigned
to a different entry in the directory, that entry will remain in the
directory, but will no longer be a speed dial number.
To dial a displayed number
When any directory entry is displayed, press
PHONE/
FLASH
played number.
22
or
CID
until ERASE is blinking,
DIR
/SELECT to display a confirma-
or to alternate between
CID DIR
until SPEED is blinking, press
DIR
or SPEAKER to dial the dis-
SELECT
to highlight
DIR
/SELECT. You
MENU
/SELECT to
MENU
/SELECT to
MENU