Battery installation & charging After installing the battery, you may be able to make or receive short calls. For best performance, place the handset in the telephone base to charge for 16 hours before use. You can keep the battery charged by returning the handset to the telephone base after use.
Telephone base installation Plug the small end of the larger Plug the end of the telephone line power adapter into the power jack at cord into the telephone jack at the the bottom of the telephone base. bot tom of the telephone base. Route cords through slots.
Quick reference guide Cordless handset /VOLUME+ CID/-VOLUME While in a menu, press to scoll up. While in a menu, press to scoll When in idle mode, press to dis- down. When in idle mode, press play directory entries. While enter- to display call summary entries.
Quick reference guide Telephone base CHARGE/IN USE • Flashes when the answering system is answering an incom- ing call. • Flashes quickly while an incom- HANDSET LOCATOR ing call is ringing. • On steady when the handset is Press to make the handset properly positioned to charge in beep when the handset is the telephone base.