Changing Feature Options - AT&T E5811 User Manual

American telephone & telegraph user manual 5.8 ghz cordless telephone/ answering system with caller id/call waiting e5811
Hide thumbs Also See for E5811:
Table of Contents

Advertisement

1.
SETUP
until desired feature
is heard (see list at
right).
2.
SKIP
REPEAT
until desired selection
is heard.
3.
SETUP
to set selection and
move
option.
- OR -
/STOP
PLAY
to set selection and
exit menu.
NOTES:
1. The message alert tone will
beep only if all the conditions
below are met:
Answering system is on
Message alert tone setting
is on
Have new messages
HANDSET LOCATOR) to
temporarily silence the mes-
sage alert tone. If you press
and hold
DELETE you will
delete all old messages and
the message alert tone will
be temporarily silenced. The
message alert tone will be
incoming message.
Answering system operation

Changing feature options

You can change how the answering system oper-
ates. Press SETUP repeatedly to hear each feature.
When you hear the feature you want to modify
press
Press
Feature options
System announces:
"Number of rings," cur-
or
rent setting, then "To
change the setting press
SKIP or REPEAT; to con-
tinue setup, press SETUP."
"Base ringer," current set-
ting, then "To change the
setting, press SKIP or
REPEAT; to continue setup,
press SETUP."
"Remote access code,"
current setting, then "To
change the setting press
SKIP or REPEAT; to con-
tinue setup, press SETUP."
digit code) 19
"Message alert tone,"
current setting, then "To
change the setting, press
SKIP or REPEAT; to con-
tinue setup, press SETUP."
SKIP or
REPEAT to change the setting.
/STOP to confirm the setting and
PLAY
Feature description:
Choose number of rings before
the system answers a call. When
toll saver is active, the system
answers after two rings if you
have new messages, and after
4/6/toll saver
four rings if you have no new
messages. When retrieving mes-
sages from a long distance call,
you may disconnect your call
after three rings so that there
will be no long distance charge
incurred.
Choose the base ringer volume
between high and low level, or
turn the base ringer off.
low/off
Select a two-digit number (10-99)
for remote access from another
telephone (page 37).
or
the remote access code number by
ten.
When on, the telephone beeps
every 10 seconds when there are
new messages.
off
32
NOTE: Press and hold
REPEAT to increase or decrease
SKIP

Advertisement

Table of Contents
loading

Table of Contents