Table of Contents
Advertisement
Message counter
Answering system operation
Message counter displays
The message counter usually displays the total
number of memos and incoming messages. See
this counter.
Message counter displays
(flashing)
(flashing)
(counting)
(flashing)
(flashing)
(or)
,
,
,
,
,
35
35
No messages.
The clock needs to be set (page 31).
Total number of messages and memos,
or message number currently playing.
Total number of messages and memos.
The number flashes when there are new
(un-reviewed) messages.
If the telephone loses power, after power is
restored, the number in the message coun-
ter will flash to indicate the clock needs to
be set.
Current remote access code while setting
(page 32).
Elapsed time while recording a memo
(page 34) or announcement up to 90
seconds (page 31).
Memory is full. Messages must be deleted
before new messages can be received.
System is answering a call, being accessed
remotely, or the clock is being set.
System is being setup or initialized.
ing system setting is turned on or off.
Current number of rings while setting
(page 32).
base speaker volume is being adjusted.
base ringer volume is being adjusted.
-
Advertisement
Table of Contents
