To Change Or Dial Entries - AT&T E5802B User Manual

1.
DIR
2.
DIR
3.
/SEL
MENU
DIR
DIR
/SEL
Press MENU
choose blinking option.

To change or dial entries

When any entry is displayed, press
options. Press
to select it.
To edit an entry
When EDIT is blinking, press
change the name and number (or distinctive ring
setting on the cordless handset) by following the
steps described on pages 21-23.
To delete an entry
Press
press MENU/SEL to display a confirmation screen
of ERASE NO YES.
You can press
NO or YES to determine:
When the YES blinking, press
delete the entry.
When the NO blinking, press
the procedure.
NOTE: Each cordless handset has its own directory.
Making changes to the directory of one handset will not effect
the directories of the other handsets.
To make an entry into a speed dial entry
Press
/SEL, then dial a memory location (1-9) to
MENU
transfer this entry to your speed dial directory.
to
NOTE: If you use a memory location that is already
assigned to a different entry in the directory, that entry will
remain in the directory, but will no longer be a speed dial
number.
To dial a displayed number
When any directory entry is displayed, press
PHONE
played number.
or
CID DIR
or until ERASE is blinking, then
CID DIR
or
CID
or until SPEED is blinking, press
CID DIR
or SPEAKER to dial the dis-
/FLASH
25
MENU
to highlight the option
MENU
/SEL. You can
MENU
to alternate between
DIR
MENU
/SEL to cancel
MENU
/SELto see
/SEL again
/SEL to