Table of Contents
Advertisement
1.
MENU
Press until desired feature
is heard (see list at right).
2.
CHANGE
Press until desired selection
is heard.
3.
MENU
Press to set selection and
move to next menu option.
-OR-
(Play/Stop)
Press to set selection and
exit menu.
NOTE: To temporarily dis-
able the message alert tone, press
any key on the answering system
except ANSWER ON/OFF. This
turns off the audio message alert
tone but the number in the mes-
sage window will continue to flash
as a reminder that there are unre-
viewed messages on the answer-
ing system. The message alert
tone will be re-activated with the
next incoming message.
NOTE: To switch off the
message alert tone for all incom-
ing messages, read the section
on disabling the message alert
function in this user's manual.
Answering System Operation
Changing feature options
Menu features can be changed to program how the
answering system operates. Press
hear each feature. Press
ture you want to modify.
Feature options
System announces:
"Announcement. Press PLAY
or press RECORD. To con-
tinue setup, press MENU."
Options: [record announcement]
"Remote access code. To
change the setting press
CHANGE."
Options: [enter 2-digit code] 19
"Message alert. To change the
setting press CHANGE."
Options: On / Off
"Announcement only, record
no messages. To change the
setting press CHANGE."
Options: On / Off
"Call screening. To change
the setting press CHANGE."
Options: On / Off
"Number of rings. To change
the setting press CHANGE."
Options: 2 / 4 / 6 /Toll Saver
NOTE: Press and hold CHANGE to advance the remote access
code number by 10.
3
repeatedly to
MENU
when you hear the fea-
CHANGE
(Default settings underlined).
Feature description:
Press REC/MEMO to record your
outgoing announcement (see page 33).
Press PLAY/STOP to stop recording.
Enter a two-digit number (10-99) for remote
access from another phone (see page 39).
When the Answering System is turned on
(and the ANSWER ON light is on) and the
Message Alert function is activated, any
new incoming message will increase the
flashing number in the message window
by one, and a beep tone will sound every
ten seconds as a reminder that there are
unreviewed messages on the answering
system.
When on, callers hear an announcement
but cannot leave messages (see page 34).
When on, you can hear callers leave
messages, or answer the call.
Choose number of rings before the system
answers a call. When Toll Saver is acti-
vated, the system answers after 2 rings if
you have new messages, and after 4 rings
if you have no new messages.
Advertisement
Table of Contents
