Harness Buckle - Britax MARATHON CLICKTIGHT User Manual

BRITAX Child Safety, Inc.
6. Replace the head pad.
a. Raise the harness to
the highest position.
b. Reattach the elastic
straps to the rear of
the head pad.
c. Reattach the hook and
loop fasteners on the
head pad around the
harness.
7. Replace the comfort
pads.

Harness Buckle

IMPORTANT: If your child eats and drinks while in the
child seat, you will need to check the buckle periodically
and rinse out any accumulated debris (see page 40).
Removing the Harness Buckle
1. Unbuckle the harness and
open the CLICKTIGHT.
2. Lift the front of the seat
cover and pull over the
CLICKTIGHT bezel to
access the buckle strap
connection.
3. Remove the
harness buckle by
turning the buckle
strap sideways and
routing the retainer
out of the front
buckle slot in the
child seat.
36
6b
6c
MARATHON CLICKTIGHT User Guide
4. Pull the end of the belly
pad and buckle retainer
out of the slot in the seat
cover to remove.
5. Turn the buckle retainer
sideways and route the
buckle assembly out of
the belly pad.
Replacing the Harness Buckle
1. Turn the buckle retainer
sideways and route it
through the fabric strip on
the belly pad.
2. Route the belly pad and
buckle retainer through
the buckle slot in the
cover.
– Ensure that the buckle
is through the correct
cover slot for the
desired buckle position.
3. Slide the end of the belly
pad over the seat and
(if applicable) over the
comfort foam.
4. Turn the buckle
retainer sideways
and route it into the
corresponding buckle
slot in the seat.
– Ensure that the
buckle is in the
correct position
and the red release
button faces out.
37