Using The Harness Buckle; Using The Chest Clip; Using The Recline; Important - Britax GROW WITH YOU User Manual

Britax Child Safety, Inc.

Using the Harness Buckle

To Fasten: Insert one tongue at
a time into the buckle.
NOTE: Proper connection
is confirmed with an
audible click after inserting
each buckle tongue.
To Release: Press the release
button and pull the tongues from
the buckle.
NOTE: Periodically clean
the buckle to ensure proper
operation. See page 42.

Using the Chest Clip

1. Open the chest clip.
a. Press tabs.
b. Pull apart.
2. Push together to fasten
NOTE: Always position the
chest clip at armpit level.

Using the Recline

IMPORTANT:

in booster mode.
This seat may be used in either the upright or recline
position in harness mode.
1. Pull the recline adjustment
handle and adjust the seat
to the desired position (See
page 8).
a. Ensure that the seat is
locked into the desired
position before installing
in the vehicle.
b. Ensure the top of the child seat does not rest against the
top of the vehicle seat back while reclining.
c. Pay attention while adjusting the recline to keep hands
clear of any pinch point.
24 24
This child seat must be used in upright Position
Table of Contents