Connection Of Arm Bed And Base Frame - Brother PR600II Service Manual

Main unit
4

Connection of arm bed and base frame

1. Attach the arm bed 1 to the base frame, and temporarily tighten the 4
screws 1 and 4 plain washers M8.
2. Align the arm bed with the marking on the base frame, and firmly tighten
the 4 screws 1.
*Key point
• Attach the arm bed so that it is parallel to the base frame.
Start movie clip (CD-ROM version only)
1
Lower shaft unit
Bolt, Socket M5X12
1
1
Torque
5.88 N-m
1
3 - 33