Adjust Bolt Attachment - Brother PR600II Service Manual

Main unit
1

Adjust bolt attachment

1. Attach the 2 bushes 2 to the handle 1. (4 locations)
2. Attach the handle to the base frame with the 2 screws 1. (4 locations)
3. Attach the 4 nuts (2, M8) 4 to the 4 adjust bolts (M8) 3.
*Key point
• Lightly tighten the nut (2, M8) against the head of the adjust
bolt (M8).
4. Attach the 4 adjust bolt assemblies 5 to the base frame.
*Key point
• Lightly tighten the adjust bolt assembly 5 against the base
frame.
1
Power unit
Screw, Pan (S/P washer)
0.00 – 0.00 N-m
M3X10
3
1
1
Torque
1
2
4
5
1
1 1
1
5
3 - 25