Antenna Assembly Attachment - Brother PR600II Service Manual

Main unit
8

Antenna assembly attachment

1. Attach the antenna assembly to the thread stand base assembly with the 4
screws 1.
1
9
Upper thread eyelet base attachment
1. Attach the upper thread eyelet base 1 and the thread guide tension plate
2 to the tension base assembly. (6 locations)
2. Thread the thread guide tension screw 3 through the spring
the nut (2, M3) 4 from the rear side of the tension base assembly, and then
tighten the thread guide tension screw. (6 locations)
3. Attach the tension axis cap 5 to the thread guide tension screw. (6
locations)
S53
3 - 16
Thread tension unit
Screw, Bind
M4X6
4.1
THREAD GUIDE COMPRESSION
5
Torque
1.18 – 1.57 N-m
, attach
S53
XC6231***
1 1
5
3
S53
2
1
4