Inner Thread Eyelet Base Attachment - Brother PR600II Service Manual

Main unit
11

Inner thread eyelet base attachment

1. Attach the thread guide tension plate 2 to the inner thread eyelet base 1.
(6 locations)
2. Thread the thread guide tension axis 3 through the spring
secure the guide tension axis to the inner thread eyelet base with the screw.
(6 locations)
3. Attach the tension axis cap 4 to the thread guide tension axis.
locations)
4. Attach the inner thread eyelet base assembly from the tension base
assembly with the 2 screws 1.
Tightening torque of thread guide tension axis
1
S52
12
Tension base bracket attachment
1. Attach the tension base bracket to the tension base assembly with the 4
screws 1.
2. Attach the bracket cover 1 to the tension base bracket with the 2 screws
2.
3. Attach the head grounding wire 2 to the tension base assembly with the
screw 3.
1
2
3
3 - 18
Thread tension unit
Taptite, Bind B
M3X8
4.3
BOBBIN WINDER GUIDE COMPRESSION
5
Taptite, Bind B
M4X8
Screw, Bind
M3X4
Screw, Pan (S/P washer)
M3X6
, and then
S52
S52
(6
0.59 - 0.78 N-m
Torque
0.39 – 0.78 N-m
X56456***
1
Torque
0.78 – 1.18 N-m
Torque
0.78 – 1.18 N-m
Torque
0.59 – 0.78 N-m
4
3
2
1
1
1
2 2 3