Removing Seat Pad For Cleaning; Troubleshooting - DJG Highrise Instruction Manual

4358-3341C High Rise 12/1/05

Removing Seat Pad for Cleaning

Remove seat pad by reversing order in the
"Preparing Child Restraint" section.
Hand wash with warm sudsy water, rinse clean and
air dry. Do not use bleach or other harsh cleaners.
Do not dry clean.
Replace seat pad by revisiting the "Preparing Child
Restraint" section.

Troubleshooting

1. If your child restraint is not held securely
by the vehicle belt:
Remove all the slack in the vehicle belt. Make sure the
belt buckle is not up against the child restraint where
the belt cannot be tightened. If you cannot secure the
child restraint tightly, move it to another seating
location.
2. If the shoulder belt crosses the child's neck
when using the child restraint:
Try moving the child restraint toward the center of
vehicle or move the vehicle seat forward or back.
Check to see if your vehicle has adjustable shoulder
belt anchor points. Do Not place the shoulder belt
behind the child.
2:05 PM Page 21
18
19