Knowing Your Vehicle Belts - DJG Highrise Instruction Manual

4358-3341C High Rise 12/1/05
5
6
2:05 PM Page 15
Hook elastic straps on
tabs on the bottom of
shell.
Optional Armrest
Covers:
Slide armrest covers
over armrests.
12

Knowing Your Vehicle Belts

This auto booster must only be used in vehicles with
appropriate vehicle belts that can be tightened securely.
If the vehicle belt cannot be tightened securely,
it must be replaced. This booster MUST only be
used with a lap/shoulder belt.
will not work with this child auto booster (or
sometimes any child restraint) include, but are not
limited to, the following:
• Do not use with any automatic/passive vehicle
seat belt.An automatic (passive) 2-point belt has no
lap belt.You must install a lap belt to secure a child
restraint.You may also need to install an extra lap belt
for an automatic (passive) 3-point belt. Refer to the
vehicle owner's manual.
• If your vehicle belt is too short,
vehicle dealer for a seat belt extender. Do not route
the seat belt any way except as shown in the
instructions.
• If the belts come out of the center of the door
or side panel or middle of the vehicle seat
cushion (so that they are forward of the bight),
A
B
13
Belt systems which
contact your
you must move the
auto booster to
another seating
location (See diagrams A
and B).