Handling the Original Document
This section describes how to load the original document on the Platen Glass.
•
Original Document Requirements
The original documents you load on the Platen Glass for copying or scanning must meet these
requirements:
Document
• Paper documents
type
• Photographs
• Books
Size (W xL)
Max. 8.5 x 11.7 inches / 216 x 297 mm
Height
Max. 0.71 inches /18 mm
•
Loading Original Documents
Load originals to copy or scan on the Platen Glass. For details on how to load a photo, see
"Photo Printing from Printed Photo" on page 34.
~
Note
Make sure any glue, ink, correction fluid, or the like on the original document is completely dry
before loading it on the Platen Glass.
1
Load the original document on the Platen Glass.
(1) Lift the Document Cover.
(2) Load the original with the side to be
copied/scanned facing down on the
Platen Glass. Align the upper left corner
of your original with the alignment mark
as shown in the figure on the right.
~ Important
• Do not place any objects weighing more than 4.4 Ib / 2.0 kg on the Platen Glass.
• Do not press or put weight on the original with pressure exceeding 4.4 Ib / 2.0 kg.
Doing so may cause the scanner to malfunction or the Platen Glass to break.
6
Before Using the Machine
Handling the Original Document
This section describes how to load the original document on the Platen Glass.
•
Original Document Requirements
The original documents you load on the Platen Glass for copying or scanning must meet these
requirements:
Document
• Paper documents
type
• Photographs
• Books
Size (W xL)
Max. 8.5 x 11.7 inches / 216 x 297 mm
Height
Max. 0.71 inches /18 mm
•
Loading Original Documents
Load originals to copy or scan on the Platen Glass. For details on how to load a photo, see
"Photo Printing from Printed Photo" on page 34.
~
Note
Make sure any glue, ink, correction fluid, or the like on the original document is completely dry
before loading it on the Platen Glass.
1
Load the original document on the Platen Glass.
(1) Lift the Document Cover.
(2) Load the original with the side to be
copied/scanned facing down on the
Platen Glass. Align the upper left corner
of your original with the alignment mark
as shown in the figure on the right.
~ Important
• Do not place any objects weighing more than 4.4 Ib / 2.0 kg on the Platen Glass.
• Do not press or put weight on the original with pressure exceeding 4.4 Ib / 2.0 kg.
Doing so may cause the scanner to malfunction or the Platen Glass to break.
6
Before Using the Machine