Handling The Original Document; Loading Original Documents - Canon PIXMA MP960 Quick Start Manual

Handling the Original Document

This section describes how to load the original document on the Platen Glass.
Original Document Requirements
The original documents you load on the Platen Glass for copying or scanning must meet these
requirements:
Document
type
Size (W x L)
Thickness

Loading Original Documents

Load originals to copy or scan on the Platen Glass. For details on how to load a photo, see
"Scanning a Photo" on page 37. For details on how to load a film, see "Scanning a Film" on
page 37.
Note
Make sure any glue, ink, correction fluid, or the like on the original document is completely dry
before loading it on the Platen Glass.
1
Load the original document on the Platen Glass.
(1) Lift the Document Cover.
(2) Load the original on the Platen Glass.
Place the original face down on the Platen
Glass.
Align the upper left corner of your original
with the alignment mark on the upper left
corner of the Platen Glass.
6 Before Printing
Paper documents
Photographs
Books
Films
* For details on positive and negative 35 mm film strips and 35 mm slides,
see "Photo Printing from Photo or Film" on page 37.
Max. 8.5 x 11.7 inches / 216 x 297 mm
Max. 0.98 inches / 25 mm
(1)
(2)