Loading Envelopes - Canon PIXMA MP610 Series Quick Start Manual

Loading Envelopes
Use either European DL or US Comm. Env. #10-sized envelope.
~ Important
• You need to print from the computer to print on envelopes.
• Do not use the following envelopes:
- Envelopes with double flaps (or sticker flaps)
- Envelopes with an embossed or treated surface
- Envelopes with pressure stickers
- Envelopes whose gummed flaps are already moistened and adhesive
• Loading Envelopes in the Rear Tray
1
Prepare the envelopes.
• Press down on all four corners and edges of the envelopes to flatten them.
• If the envelopes are curled, hold the opposite corners and gently twist them in the opposite
direction.
• If the flap of an envelope is curled, flatten it.
• If the leading edge of an envelope is puffed up or curled, use a pen to press the envelope
flat and sharpen the crease.
Press the envelope flat, working from the middle to the edge.
o
x x
X
r-----l( c..-----l( ,,"' - --' " :..-.- _ -
---(-l(
* The above illustrations show a side view of the leading edge of the envelope.
~ Important
The envelopes may jam in the machine if they are not flat or the edges are not aligned.
Make sure that no curl or puff exceeds 0.1 inches / 3 mm.
Before Using the Machine
19
Loading Envelopes
Use either European DL or US Comm. Env. #10-sized envelope.
~ Important
• You need to print from the computer to print on envelopes.
• Do not use the following envelopes:
- Envelopes with double flaps (or sticker flaps)
- Envelopes with an embossed or treated surface
- Envelopes with pressure stickers
- Envelopes whose gummed flaps are already moistened and adhesive
• Loading Envelopes in the Rear Tray
1
Prepare the envelopes.
• Press down on all four corners and edges of the envelopes to flatten them.
• If the envelopes are curled, hold the opposite corners and gently twist them in the opposite
direction.
• If the flap of an envelope is curled, flatten it.
• If the leading edge of an envelope is puffed up or curled, use a pen to press the envelope
flat and sharpen the crease.
Press the envelope flat, working from the middle to the edge.
o
x x
X
r-----l( c..-----l( ,,"' - --' " :..-.- _ -
---(-l(
* The above illustrations show a side view of the leading edge of the envelope.
~ Important
The envelopes may jam in the machine if they are not flat or the edges are not aligned.
Make sure that no curl or puff exceeds 0.1 inches / 3 mm.
Before Using the Machine
19