Handling the Original Document
This section describes how to load the original document on the Platen Glass.
Original Document Requirements
The original documents you load on the Platen Glass for copying or scanning must meet these
requirements:
Document
type
Size (W x L)
Thickness
Loading Original Documents
Load originals to copy or scan on the Platen Glass. For details on how to load a photo, see
"Scanning a Photo" on page 36.
Note
Make sure any glue, ink, correction fluid, or the like on the original document is completely dry
before loading it on the Platen Glass.
1
Load the original document on the Platen Glass.
(1) Lift the Document Cover.
(2) Load the original on the Platen Glass.
Place the original face down on the Platen
Glass.
Align the upper left corner of your original with
the alignment mark on the lower right corner of
the Platen Glass.
Paper documents
Photographs
Books
Max. 8.5 x 11.7 inches / 216 x 297 mm
Max. 0.7 inches / 18 mm
(1)
(2)
Before Printing
5