JVC KD-S580 Service Manual page 7

Removing the CD mechanism assembly
Prior to performing the following the procedure,
remove the front panel assembly, the front chassis,
the heat sink, the bottom cover, the rear panel and
the main board assembly.
1. Remove the three screws G .
Removing The LCD key operation board
Prior to performing the following procedure, remove
the front panel assembly.
1. Remove the four screws H on the back of the front
panel assembly.
2. Release the twelve joints f .
3. Pull out the LCD key operation board.
(See Fig.9)
(See Fig.10~12)
Front panel
Joint f
CD mechanism assembly
G
G
Fig.9
H
H
Fig.10
Joint f
Joint f
Rear cover
Fig.11
LCD operation board
Fig.12
KD-S580
G
Front chassis
H
H
Joint f
Joint f
1-7