JVC KD-S580 Service Manual page 5

Disassembly
<Main body>
Removing the front panel assembly
1. Push the release bottom in the lower right part of the
front panel and remove the front panel assembly in
the direction of the arrow.
Removing the front chassis assembly
Prior to performing the following procedure, remove
the front panel assembly.
1. Release the two joints a and the two joints b on
both sides of the body using a screwdriver, and
remove the front chassis assembly forward.
Removing the heat sink
1. Remove the screw A and the two screws B on the
left side of the body.
(See Fig.1)
Front panel assembly
(See Fig.2, 3)
Front chassis assembly
(See Fig.4)
Release bottom
Fig.1
Front chassis assembly
Fig.2
Joint b
Joint b
Fig.3
A
B
Heat sink
Fig.4
KD-S580
Joint a
Joint a
B
1-5