Safety Helmet Hook; Seat Lock - Sym HD 200 EVO Owner's Manual

• High/Low Beam Switch
This is the high and low beam of headlight switching switch. Press this switch to switch between high
and low beams.
This is for high beam.
This is for low beam. (Please turn to low beam when riding in city)
• Passing Switch
Turn ignition switch "ON" and press this button down. Then, the high beam of headlight will
come on immediately to warn the driver of the vehicle ahead that you intend to overtake
him/her. (For overtaking, high beam indicator will come on at this time) This button will return
to original position after releasing.
• Horn Switch
Press this button down when ignition switch is in
the "ON" position to sound, the horn.
• Turn Signal Switch
Turn signal lights are used when turning left/right or changing lane.
Turn ignition switch to "ON", and slide the turn signal switch to left or right. Then, the turn signal lights will
flash.
To release, simply return the turn signal light button to the original position.
Right-side turn signal light flashing means you intend to make a right turn.
Left-side turn signal light flashing means you intend to make a left turn.

SAFETY HELMET HOOK

Ÿ Open the seat, and hook the safety helmet chin belt onto the hook, and then lock the seat.
WARNING:
Ÿ Never hang your safety helmet on the helmet hook while riding. Doing so could interfere with your
riding safety and could damage the scooter.

SEAT LOCK

• Unlock:
Insert the ignition switch key to the seat lock and turn to left to unlock.
• Lock:
Press the seat down and it will be locked automatically.
After the seat has been locked, check to make sure it has been locked properly by lightly lifting the seat.
CAUTION:
Ÿ Do not put the scooter key in the luggage box compartment after seat has been unlocked. This will
prevent the key from being locked inside the luggage compartment if the seat should be unintentionally
closed.
Ÿ Be sure to remove the key after the seat has been locked.
NOTICE:
Ÿ Do not press the horn button when
you are in the no horn area.
7. Use of Each Component
11