Use Of Buttons - Sym HD 200 EVO Owner's Manual

USE OF BUTTONS

High/Low Beam Switch
Turn Signal Switch
Horn Switch
Ÿ Light Switches
When the switch is turned to this position as the engine is
being started, headlight, rear light, instrument panel light,
and position light will come on.
When the switch is turned to this position as the engine
is being started, rear light, instrument panel light, and
position light will come on.
When the switch is turned to this position, all lights will
go off.
• Electrical Starter Button
This is a starting motor button (switch) for engine starting.
With the main switch "ON", press this button while holding the front or rear brake lever will start
the engine.
CAUTION:
• Release this button immediately after engine has been started, and never press the button again to
avoid damaging the engine.
• This mechanism is a safety design. The engine can only be started after the front or rear brake lever
(pedal) has been applied.
• Do not use light system. Turn headlight and turn signal lights to the "OFF" position when the engine
is being started.
7. Use of Each Component
10
Passing switch
Light Switches
Note:
Ÿ Position Light Function:
This light can indicate the
motorcycle's position when the
motorcycle is running in dim,
rainy, or foggy weather.
Electrical Starter
Button