Time Mask - EverFocus EDN850H User Manual

EDN850H
preceding the trigger. Input the desired length of pre-trigger buffer time. It can be
set up to 120 seconds.
Post-Alarm Buffer: Image saved internally in the server from the time immediately
after the trigger. Input the desired length of post-trigger buffer time. It can be set
up to 120 seconds.
Press Apply to apply the setting changes or Reset to reset without saving the
change.
Re-trigger Filter Setting
Re-trigger Filter: Set a re-trigger filter time, if another event is triggered during
this time, this triggered event will be ignored.
Press Apply to apply the setting changes or Reset to reset without saving the
change.

4.7.4 Time Mask

Time Mask Setting
Time mask setting allows you to schedule event actions.
Select Always for event action to be taken continuously.
49
Downloaded from www.Manualslib.com manuals search engine