Sens-Up - EverFocus EDN850H User Manual

4.4.2.7 SENS-UP

SENS UP is used to keep a brilliant, vivid screen image by automatically detecting
changes in the level of light under low light level conditions. The value is from x2
~x128.
1. Please direct the arrow to point to "SENS UP" on the SETUP menu by using the
2. Select the mode you would like to operate by pressing the LEFT or RIGHT
3.
Downloaded from www.Manualslib.com
UP and DOWN buttons.
button.
AUTO: Low light level auto mode. Default value is AUTO (Up to X 10).
SETUP
DC <┘
LENS
SHUTTER ___
WHITE BAL. ATW
BACKLIGHT OFF
AGC MIDDLE
DNR LOW
AUTO <┘
> SENS-UP
SPECIAL <┘
EXIT
OFF: The function is disabled.
Press SET button when you finish all the settings.
Note:
1. The maximum storage magnification in low light level movement situations can be
adjusted by pressing the mini-joystick in "AUTO" mode.
2. The screen becomes brighter when the magnification increases; yet the after image
increases as well.
3. Please be noted that spots and noise may appear if storage magnification increases
when SENS-UP is operating. This is a normal phenomenon.
manuals search engine
> AUTO
32
EDN850H
LIMIT
X 10