Motion - EverFocus EDN850H User Manual

Hide thumbs Also See for EDN850H:

Table of Contents

4.7.2 Motion

Downloaded from

www.Manualslib.com

5. Check "Enable Pre-alarm Buffer" and "Enable Post-alarm Buffer". For pre-and

post alarm buffer setting, please refer to "4.7.3 Alarm".

6. Check "Enable This Event".

7. Select "Always" for time mask. For detail about Time Mask, please refer to

"4.7.4 Time Mask".

8. Click

to save this event in event list.

Motion Detection

User can define the motion area to be detected by left clicking the mouse to draw

lines. Every click is an end point of the line. When the detection area is formed,

double click the mouse to have all the lines connected. To remove the selection,

simply right click the mouse, the selected polygon will be deleted.

Press

to have the entire screen selected for motion detection.

Press

to clear all selections.

Press

and click on the polygon, to erase that polygon.

manuals search engine

to update the current image.

EDN850H

Table of Contents