Advertisement
Available languages
Available languages
4f
4g
4h
4j
Slide the loop ends of the tether straps between the front car seat and back
(dia
4d). Bring the buckle ends of the tether straps around the
as shown
outside of the car seat and feed through the loops
under the seat. Snap the buckles of the tether straps onto the tongues on the
3
sides of the child seat
loose ends downwards
off arm on the side opposite the seat belt buckle. Pull back the child seat cover
to reveal the crotch strap. Feed the belt through the lock-off belt guide and seat
(dia
4g), up on to the top face of the seat base, behind the crotch
shell slot
(inset)
strap
and down through the slot on the other side of the child seat.
Open the other lock-off arm, feed the seat belt under the lock-off arm and
attach the tongue into the buckle
4i
4k
. Provisionally tighten the tether straps by pulling the
4
.
(approx.600 –
(dia
4h).
Pull all of the seat belt slack through the
child seat ensuring the seat belt is not
(dia
twisted
as possible, close the lock-off arms on
BOTH
sides of the seat ensuring that
they click into place.
If the buckle now lies in the position
marked as wrong with a
belt cannot be correctly tightened
try another seating position in the car.
Finally tighten the tether straps by pulling
the loose ends downwards
on lids of storage boxes or similar.
seat by trying to move it back and forth
and side to side. If it seems loose, you
DO NOT
rest the back of the child
seat on the dashboard or close to the
windscreen.
9-25 kg
2
. Slide the buckle ends
900mm). Open the lock-
4i). When the belt is as tight
and the seat
(dia
(dia 4k)
4j),
Advertisement
