Limiting The Needle Bar Frame On The Pfaff 1591 And 1571 - Pfaff 1571 Instruction Manual

Adjustment
13

Limiting the needle bar frame on the PFAFF 1591 and 1571

.04.03
13 - 4
Requirement
With the stitch length set at "5", when the needle is in its front and rear point of reversal
screw 4 should be the same distance from the inside edge of its hole.
3
2
4
=
Fig. 13 - 03
Switch on the machine and set the stitch length at "5".
Sew one stitch and check the rear position of screw 4 in accordance with the
requirement.
Operate the reverse feed key, sew one stitch and check the front position of screw 4 in
accordance with the requirement.
To carry out the adjustment shift plate 1 (screw 2 and nut 3) in accordance with the
requirement.
=
4
1