Installation and commissioning
2 x
No
8 - 8
Switch on the machine.
Press TE/Speed key twice to select the input mode.
TE
No
101
Select the parameter group "600" by pressing the corresponding +/- key.
TE
No
600
Confirm the selection by pressing the corresponding +/- key.
Enter the code number, see Chapter 9.10 Entering/changing the code number.
TE
No
603
Select the parameter group "603" by pressing the corresponding +/- key.
TE
No
603
Let the machine carry out one revolution by pressing the corresponding +/- key.
Check the needle bar position.
2.5
2.5
VAL
II