Mounting The Flange Motor; Mounting The Flange Motor To The Bearing Plate; Mounting The Flange Motor To The Machine - Pfaff 1571 Instruction Manual

8

Mounting the flange motor

.02
8

Mounting the flange motor to the bearing plate

.02.01
1
8
Fig. 8 - 04
Attach bearing plate 1 to motor 2 with screws 3 as shown in Fig. 8 - 04.
Remove the wedge from motor shaft 4.
Attach angle bracket 5 with screws 6.
Fit toothed belt wheel 7 to the motor shaft 4, so that the point of the screw is located in
the groove of the motor shaft.
Screw threaded stud 8 into the bearing plate 1.
8

Mounting the flange motor to the machine

.02.02
2
Fig. 8 - 05
3
3
3
1
Installation and commissioning
7
2
4
3
Attach bearing plate 1 of motor 2 to the
machine case with screws 3 (only tighten
screws 3 slightly).
3
6
5
8 - 3