Pfaff 1571 Instruction Manual page 60

Input
C
D
INS
DEL
END
11 - 7
PM
2
2
This input menu can only be selected if the end backtack function is
activated.
By pressing the corresponding +/- key select the desired value for the number of reverse
stitches (C) of the end backtack for the current seam section.
By pressing the corresponding +/- key select the desired value for the number of forward
stitches (D) of the end backtack for the current seam section.
By pressing the corresponding +/- key select the desired value for the end backtack
speed of the current seam section.
Select the next input menu by pressing the Scroll key.
PM
2
2 INS
By pressing the corresponding +/- key a new seam section is inserted.
By pressing the corresponding +/- key the current seam section is deleted.
By pressing the corresponding +/- key it is possible to stipulate whether the selected
seam section is the last one in the program ("YES") or whether another seam section
should be added ("NO").
By pressing the Scroll key, the first input menu is selected again
or
change to programmed sewing by pressing the TE/Speed key. In this case the values
entered are stored.
C D
3 3 900
END
DEL NO