Adjustment
15
Limiting the needle bar frame on the PFAFF 1591
.04.03
● Switch on the machine and set the stitch length at "5".
● Sew one stitch and check the rear position of screw 4 in accordance with the requirement.
● Operate the reverse feed key, sew one stitch and check the front position of screw 4 in
● To carry out the adjustment shift plate 1 (screw 2 and nut 3) in accordance with the re-
8
Requirement
With the stitch length set at "5", when the needle is in its front and rear point of reversal
screw 4 should be the same distance from the inside edge of its hole.
4
=
Fig. 15 - 03
accordance with the requirement.
quirement.
1
=
4
3
2