13
Parameter settings
.08
13
Parameter input example
.08.01
Switch on the machine
Select input mode by pressing TE/Speed key twice.
2 x
No
Select parameter group "500" by pressing the corresponding +/- key.
Confirm selection by pressing the corresponding +/- key.
Enter the code number, see Chapter 9.10 Entering/changing the code number.
Select the desired parameter, e.g. "501" by pressing the corresponding +/- key.
No
Set the desired parameter value by pressing the corresponding +/- key.
VAL
By pressing the TE/speed key, the value is taken over and the machine changes to the
sewing mode.
TE
No
VAL
101
II
TE
No
500
TE
No
VAL
501
3500
Adjustment
13 - 51