Optional Telemetry Sensors - FUTABA 6k Instruction Manual

Various telemetry sensors (optional) information display and alarm setting
Various telemetry sensors (sold separately) are connectable to the S.BUS2 port of the R3006SB through
a 3-way hub and relay terminals. The information of sensors connected at initialization can be viewed as
long as 2 or more of the same kind of sensor are not used (for example, 2 temperature sensors).
● Sensors that can be used with the T6K: Futaba SBS-01T, SBS-01RM, SBS-01RO, SBS-01A
● Robbe sensors that can be used with the T6K: Robbe TEMP125, VARIO-1712, VARIO-1672 (Setting change is needed in a
SENSOR screen.)
*Futaba does not sell Robbe sensor.
Sensor Connection
TEMP Sensor
SBS-01T/TE
R.P.M.（magnet）Sensor
SBS-01RM(RB)
R.P.M.（optics）Sensor
SBS-01RO
Altitude Sensor
SBS-01A
Method
Sensor information can be viewed by calling telemetry from the menu and calling the connected
sensor display page. The detailed setting screen of that sensor can be called by selecting and
pressing the sensor you want to select with the Jog key.
● Refer to the receiver battery (RX-BATT) item for a description of key operation.
① Select "TELEMETRY" from the
menu with the Jog key.
② The sensor item of your choice
is chosen by Jog key, and Jog
key is pressed.
HUB
Sensor set up
S.BUS2(SB2/B)
Connector
HUB
*Refer to the manual of each sensor for the
mounting instruction to the model of sensor.
81