S.bus Wiring Example - FUTABA 6k Instruction Manual

S.BUS WIRING EXAMPLE

Receiver
CH MODE
MODEＢ(S.BUS)
S.BUS Servo
Optional Parts
HUB
Orange
44
SB/6
Switch
Port
HUB
HUB HUB
S.BUS Servo
HUB
（Another power supply）
Switch
HUB
Battery
Three connectors
can be inserted.
●S.BUS Servo
Since the channel number is
memorized by the S.BUS itself,
any connector can be used.
Battery
Optional Parts
●Terminal box
Four connectors can be inserted
HUB
Power supply
●When separate power supply used
When a large number of servos are used or
when high current servos are used, the servos
can be driven by a separate power supply by
using a separate Power Supply 3-way Hub.
Optional Parts
HUB
Green
WARNING
Please make sure that you use a
battery that can deliver enough
capacity for the number and
kind of servos used. Alkaline
batteries cannot be used.
Used when using
a separate power
supply battery.