Viessmann VITOLIGNO 300-C Operating Instructions Manual page 46

Service
Emptying the ash box
A E
Fig.42
01. Switch off the boiler.
02. Only for pellet supply via vacuum system:
Open the l.h. front panel (door)
03. Open the tensioning toggles
down on the tensioning toggle clip. Push the ash
box a little to the left.
04. Extract locking bolt
as far as it will go.
05. Pull out ash box
E
Note
The telescopic handle can be pulled out to various
lengths.
06. Empty the ash box. For this remove the ash box
cover.
07. Remove residues of ash from the bottom plate.
08. Reseal the ash box with its cover.
46
(cont.)
B
C
.
A
; for this push
B
. Push ash partition
C D
towards the front.
D
09. Proceed in reverse order to re-insert the ash box
and close the boiler.
Note
Observe before closing the boiler that ash separa-
tor D must be opened again.
10. Switch the boiler ON.
back