10.2. Other Faults; 10.3. Malfunctions - Hobart Ecomax 502L Installation And Operation Instructions Manual

10. TROUBLESHOOTING GUIDE
TYPE OF FAILURES
Glasses are totally or partially
cloudy
Glass breakages.
TYPE OF FAILURES
Machine suddenly stops dur-
ing wash program.
The four button LEDs flash.

10.2. OTHER FAULTS

POSSIBLE CAUSE
Surface of glasses is rough and porous,
this is called glass corrosion
Use of inappropriate dish or glass racks.

10.3. MALFUNCTIONS

POSSIBLE CAUSE
Machine is connected to an energy
management system which cuts out the
energy consumer at a given point, or ma-
chine is interlocked with another energy
consumer unit.
Blown site fuse.
Temperature probe
rinse booster or tank defective.
Pressure transmitter
rinse booster or tank defective.
Control defective.
REMEDY
This is not caused by a malfunction on the machine.
Replace with new glasses.
Use appropriate racks.
REMEDY
Connect machine separately (call electrician).
Check site fuses.
Call the after sales service.
Call the after sales service.
Call the after sales service.
20