Table of Contents
Advertisement
4.
START-UP
4.4.
SOFTENER (OPTIONAL)
NOTE:
For the first run, the softener has to be filled with regenera-
tion salt and potable water.
Attention:
Filling the salt reservoir with cleaning agent will damage the
water softener.
– Open the door.
– Unscrew the softener lid and fill the softener with 1.5 kg of "Granu-
lar regeneration salt" (do not use salt tablets).
– Fill up the softener with potable water (only at the first run). Clean
seal and rim of softener lid carefully, before closing the lid.
– Close lid and tighten.
– In order to prevent corrosion it is necessary to remove any salt
residues from tank bottom.
– Adjust the water hardness according to section 7.3.
When the Salt indicator
has to be refilled with regeneration salt.
There will be a slight delay before salt light goes out after refill.
11
➅
flashes during operation, the softener
Hide quick links:
Advertisement
Table of Contents
